Country Home With Rustic Charm
Specifications
Square Footage
Total Above-ground living area | 1912 |
Main Level | 995 |
Upper Level | 917 |
Lower level living area | |
Footprint The dimensions shown are for the house only (indicating the smallest area needed to build). They do not include the garage, porches, or decks, unless they are an integral part of the design. |
26 W x 44 D |
Rooms
Above-ground bedrooms | 3 |
Above-ground bathrooms | 2.5 |
Master suite | Upper |
Lower-level bedrooms | 0 |
Lower-level bathrooms | 0 |
Attributes
Stories | 2 |
Parking | garage |
Number of stalls | 1 |
House height
Traditionally, the overall height of a house is determined by measuring from the top of the finished floor on the main level, to the highest peak of the roof.
|
29 |
Ceiling heights Raising or lowering the height of the ceilings on one or more floors of a house is often a simple change that can be made by your builder. However, if you want to raise the ceiling of the main floor of a two-story home, there has to be room to add steps to the existing staircase. |
|
Main level | 10.667 |
Upper level | 9 |
Vaulted ceilings
We consider a room to be vaulted if the ceiling - whether flat, angled, or curved - is above 10 feet at its highest point. If you prefer that one or more rooms not be vaulted in your new home, this is a very simple change that your builder can make for you.
KEY TO SYMBOLS: LR = Living Room/Great Room DR = Dining Room FAM = Family Room FOY = Foyer STU = Study/Library/Den KIT = Kitchen SUN = Sunroom MBR = Master Bedroom MB = Master Bath LOF = Loft OFF = Office/Guest Room REC = Recreation/Game Room ALL = Entire Level |
MBR, BR2, BR3 |
The front entry deck wraps around to the side of the home, providing plenty of outdoor space to enjoy the views. At the entry foyer, there is a coat closet and room for a bench and built–ins. A beam above delineates the entry from the open living space just to your right. The living room, dining area and kitchen are open to each other, and the beautiful wood ceiling in the living area is about 10’8″ high with exposed wood beams. The original house had a concrete floor, which provides thermal mass for cooling and heating. A pair of glazed doors that provide sunlight and views in the dining area open onto the outdoor deck. A large center island in the kitchen provides additional workspace as well as an eating bar. A laundry room is located next to the kitchen, with a door to an optional one–car garage. (Please note that the photos on the website do not show the garage.) From the kitchen, there is a door to a powder room and another door opening to a cozy family room at the rear. The family room ceiling drops to just over 10′ and has exposed wood beams.
A skylight above the stair landing provides sunlight as you go upstairs. The rooms on the upper floor sit under the slope of the roof. To the right of the landing is the master suite, while a hall on the left leads to bedrooms 2 and 3. Both the master bedroom and Bedroom 2 have vaulted ceilings that peak at 15’6″ and slope down to about 5′ at the window wall. A 7’–long dormer in each room opens up the sloping ceiling to a height of almost 9′ at the end wall. The master bedroom also has a generous–sized walk–in closet, a private full bath with a skylight, and a niche for a built–in or a bookcase. Bedroom 3 floor is located one step down from the rest of the upper level, to provide more head room. The ceiling vaults from 4’6″ at the end walls to 12′ at the center, and has a skylight for additional light. Bedrooms 2 and 3 share a full bath with another skylight.
Foundation Info
This house was originally located near a creek, and designed to have a “floating” steel–grid and concrete pier foundation system. However, if you prefer a basement, crawlspace or a slab foundation, these are fairly simple and inexpensive changes that your builder can often make for you.
Please Note
This house was originally designed for a couple that lives in southwest Colorado, near Ridgway. Understandably, they do not want another house just like theirs built nearby. If you’re planning to build within a 200–mile radius of Ridgway, the architect needs to approve the location before she’ll grant a copyright release allowing you to legally build the house. Just give us the address or location of your property – via email or phone – and we’ll get back to you right away.
Front Elevation For Rustic Charm
Rear Elevation For Rustic Charm
Side 1 Elevation For Rustic Charm
Side 2 Elevation For Rustic Charm
Brief Description
Rustic Charm is a modest three–bedroom home that was originally built near a creek in Colorado. Decorative wood details are located at the roof eaves, lending a whimsical aesthetic to the wood shingled and batten siding exterior. With plenty of windows on three sides, and strategically placed skylights in the roof, this charming house is filled with natural light during the day.
Or order by phone by calling 888-388-5735
Laura Daley – Architect
To learn about this architect or firm, and/or to view all of their other plans, just click on the name above.
Plan ID #
LD-005Click on any item below to see full explanation
- What is bond paper?
Bond paper
Printers stopped using blue ink many years ago - it was very difficult to read, and the fumes were dangerous to inhale. So what we used to refer to as blueprints are now called bond copies (black ink printed on white bond paper). - 5-Set Construction or Bid Set
5-Set Construction or Bid Set
If you are building in an area that requires very few copies to construct a house, all you might need is the 5-Set Package. It's also best for folks wanting either a quick bid process, or bids from more than one builder. In either case, you can always purchase more bond copies later on if you need them, or upgrade to a Mylar, PDF or CAD version (your original cost will be deducted from the price of the upgrade). Bond copies cannot be duplicated, but they come with a formal Copyright License that gives you the legal right to construct the house, and to modify the plans beforehand to suit your needs. If allowed in your area, modifications can be "marked up" (some people refer it as "red-lining") right on the plans. - What is mylar?
Mylar
Vellum paper is no longer being manufactured, so we've switched to a vastly superior product called Mylar. These semi-transparent sheets are actually a thin-film composite that was designed for plan modification, using a simple electric eraser. The ink that is printed on them sits on the surface (instead of sinking into a coated vellum sheet), so lines and dimensions can be erased and redrawn quite easily by any design professional. - Plans printed on Mylar
Plans printed on Mylar
If you - like the vast majority of our other customers - intend to modify the plans before construction, and you are building in an area where plans can't simply be "marked up" with a red pen, the Mylar copy is definitely what you should order (unless of course you prefer the PDF version). After the changes have been made to this "master" copy, you or your builder can then print as many copies as you need, whenever you need them, on regular bond paper. That way everyone - you, your builder, his or her subcontractors, local permit officials, and your lender - will have the final version of the plans to work with. Even though they cost a bit more initially, they will definitely save you time and money later on. Mylar copies come with a formal Copyright Release giving you the legal right to modify them in any way you wish, and to make as many copies of the plans as you need to successfully build one house. Mylar copies are shipped with a free bond copy of the plans, so that you have something to look over and mark up before making final decisions about the changes you want made to the "master" set. - What are PDF electronic files?
PDF electronic files
The acronym PDF stands for Portable Document Format. These are electronic files that can be emailed from computer to computer. You can open them on your own computer as well as email them to others, and the Copyright Release you receive with them allows you to make as many copies as you need before and after modifications are made. - Plans in PDF format
Plans in PDF format
THE most popular way to purchase plans these days is in PDF format. It's no more expensive than the Mylar version, plus you save $30 in shipping fees because the plans are emailed to you. But the biggest reason why they're so popular is because they can be passed along to others via email. The builder can zip them to their sub-contractors, truss manufacturers, and (if needed) an engineer; you can open them on your own computer to view at your home or office; and you can zip them to your builder (or builders), lender, and anyone needing to approve the plans before construction. If you'd still like to make modifications on Mylar sheets, your Copyright Release allows you (or your builder) to do this locally, and you'll only need to print a handful of the most important sheets. - What are CAD files?
CAD files
The acronym CAD stands for Computer-Aided Design. Design software from AutoCAD and numerous other companies - ArchiCAD, SoftPlan, VectorWorks, etc. - is used to draw plans in a format (DWG - short for drawing) that can be easily manipulated and modified on a computer. This can speed up the process of modification dramatically - for example, a change in one part of the plans creates an automatic change throughout the drawings -- potentially saving the person making the changes quite a bit of time, and thus saving you quite a bit of money! - Plans in CAD format
Plans in CAD format
Plans purchased in this electronic format are emailed, so you get them right away, and there's no shipping fee. Like the Mylar and PDF options, these plans come with a formal Copyright Release giving you the legal right to modify them in any way you wish, and to make as many copies of the plans as you need to successfully build one house. If the changes you wish to make to our plans are rather extensive, or structural in nature (including changing exterior wall systems), purchasing the plans in CAD format will almost certainly be your best option. Design professionals charge by the hour, and making changes to electronic files is much faster and easier than erasing and redrawing lines and dimensions on a Mylar copy. So purchasing an electronic version of the plans can save you both time and money. The files you receive will provide the drawings in at least two formats: .DWG files that will enable the person modifying your plans to do so using AutoCAD software (the standard for the entire construction and engineering communities); and .PDF files that will enable you to view the plans on your home or office computer. If the plans were originally drawn with a design software program other than AutoCAD (eg. SoftPlan, ArchiCAD, VectorWorks, etc.), this will be noted at the end of the Description of this house, and the email will include these files along with the .DWG and .PDF formats.